EN - 16 -
Recommendations
!
Warning:
Do not use mechanical devices or other artificial means to accelerate the
defrosting. process. Do not use electrical appliances in the food storage of the appliance.
Keep the appliance ventilation openings free. Do not damage the refrigerator’s refrigerant
circuit.
•
Do not damage the refrigerant circuit.
•
Do not allow children to play with the appliance. Children must never
sit in the drawers or hang on the door.
•
Do not use adapters or shunts, which could cause overheating or
burning.
•
Do not plug old, warped power supply cables.
•
Do not twist and bend the cables, and keep them away from hot
surfaces.
•
Do not plug the power supply with wet hands.
•
Your old appliances contain insulation gases and refrigerant that
must be disposed of properly. Please ensure that the refrigerant
circuit is not damaged before the appliance is taken away for
disposal.
•
After installation make sure that the power cable is not trapped
underneath appliance.
•
Do not defrost the appliance with other electrical devices (i.e. hair
dryer) or other artificial means, and do not use sharp metal objects
to remove the ice on the freezer, as this could cause damage to
the refrigerant system.
•
Do not operate any electrical appliances inside the refrigerator or
freezer.
•
Do not place bottles (glass or tin) containing liquids (especially
sparkling liquids) into the freezer as they could cause the bottle to
burst during freezing.
•
Do not touch the cooling surfaces while the appliance operates, especially with wet
hands, because the skin may stick to cold surfaces.
• Do not eat ice, which has just been removed from the freezer.
•
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.Children should be supervised to ensure that they
don’t play with the appliance.
•
If the supply cord is damaged it must be replaced by the manufacturer or service agent
or appointed qualified person.
