Smeg CPF36UGGAN, Руководство пользователя

Страница: 15 / 22

Installation
17
EN
• Wire size and connections must conform
to the requirements of the National
Electrical Code, ANSI/NFPA 70
ELECTRICAL CODE (*) – last edition or
CSA Standard C22.1-94, Canadian
Electrical code, Part 1 (**) and CSA
C22.2 No. O-91 or latest edition and
all local codes and ordinances for the
kilowatt rating of the range.
IMPORTANT: Observe all governing
codes and ordinances.
• Your local codes and ordinances, of
course, take precedence over these
instructions. Complete electrical
connections according to local codes
and ordinances.
• lf codes permit and a separate
grounding wire is used, it is
recommended that the suitability of the
ground path be checked by a qualified
electrician.
• Check with a qualified electrician if you
are not sure whether the range is
properly grounded. Do not ground to a
gas pipe.
• A 120-volt, 60-Hz, AC-only, 15-
ampere, fused electrical supply is
required. A time-delay fuse or circuit
breaker is recommended. It is
recommended that a separate circuit
serving only this appliance be provided.
Recommended Grounding Method
For your personal safety, this range must be
grounded. This range is equipped with a 3-
prong grounding plug. To minimize possible
shock hazard, the cord must be plugged
into a mating 3-prong grounding
receptacle, grounded in accordance with
the National ANSI/NFPA 70 Electrical
Code (latest edition*) or the Canadian
Electrical Code (CSA)** and local codes
and ordinances. lf a mating receptacle is
not available, it is the personal responsibility
and obligation of the customer to have a
properly polarized and grounded 3-prong
outlet installed by a qualified electrician.
Copies of the standards listed
above may be obtained from:
* National Fire Protection
Association, 1 Batterymarch Park,
Quincy, Massachusetts 02169-
7471
** CSA International, 8501 East
Pleasant Valley Road, Cleveland
OH 44131-5575