background image

Instructions for the User

53

9. USING THE OVEN

Before using the oven, check that the display is showing the 

 symbol.

The appliance becomes very hot during use. Oven gloves should always be worn.

9.1

Precautions and General Advice

When the oven and grill are used for the first time, they should be heated to the maximum temperature
for long enough to burn off any oily residues left by the manufacturing process, which might contaminate
foods with unpleasant smells. After an interruption in the electricity supply, the display flashes at regular
intervals, showing 

. For setting instructions, see point “11. ELECTRONIC PROGRAMMER”.

Oven accessories which may come into contact with foods are made from materials compliant with the
relevant regulations.

During cooking, do not cover the bottom of the oven with aluminium foil, and do not place pans or trays
on it; this may damage the enamel coating. If you wish to use greaseproof paper, position it so that it
does not interfere with the hot air circulation inside the oven.

To avoid unpleasant contact with any steam inside the oven, open the door in
two stages: hold it half-open (about 5 cm) for 4-5 seconds, then open it
completely. If you have to carry out any procedures on foods, leave the door
open for as short a time as possible to prevent a drop in the oven temperature
which will impair the cooking results. When the door is opened the oven's
internal fan cuts out automatically; it starts up again when the door is closed.

9.2

Cooling fan system

A cooling system comes into operation a few minutes after the oven is switched on. Operation of the fan
generates a normal air flow which comes out above the door and may continue for a short time even
after the oven is turned off. 

9.3

Using the electric grill

For short cooking procedures, such as final browning of cooked meat, select the static grill function 
and turn the thermostat knob to the maxium temprature setting. The fan grill function (on some models
only) allows real cooking processes to be carried out, thanks to the forced fan system that ensures the
heat penetrates inside the food. For this type of cooking operation, select the fan grill function 

 and

use the function selector knob to set the ideal cooking temperature (in all cases no more than 200°C).

9.3.1 Operation of the grill + rotisserie

The grill function allows cooking in combination with the rotisserie. Fit the spit rod into the rotisserie
bushing, select the grill function 

 and turn the thermostat knob to the temperature required (never

exceed 200°C).

Prepare the rotisserie rod with the food and tighten the screws 

of the prongs. Fit the supporting frame

onto the third runners from the bottom. Remove the handle 

and position the rotisserie rod so that

the pulley 

can turn on the frame 

B

. Push the frame 

fully into the oven until the tip of the rotisserie rod

enters the hole 

on the rear wall of the oven. Place a tray 

on the bottom runners and pour a little

water into it to prevent smoke from forming.

Содержание CP60X






















Отзывы: