Cleaning and maintenance
83
EN
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections
A
are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
4.4 Cleaning the door glazing
The door glazing should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
Removing the internal glass panes
For easier cleaning the internal glazing
panes of the door can be removed.
1. Remove the internal glazing pane by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (
1
).
2. Pull the internal glazing pane from the
front strip (
2
) to remove it from the door.
