Smeg Classica Aesthetic SX91GM Скачать руководство пользователя страница 3

PRECAUTIONS  -  33

91477A593/C

e

THE VICINITY OF THIS 
APPLIANCE WHILST IT IS IN 
USE.

• DO NOT MODIFY THIS 

APPLIANCE.

• Always wear personal 

protective equipment (PPE) 
before carrying out any work 
on the appliance (installation, 
maintenance, positioning or 
moving).

• Do not clean the appliance if it 

is still hot or in operation.

• Before performing any work on 

the appliance, switch off the 
power supply.

• WARNING: Make sure that 

the appliance has been 
switched off and disconnected 
from the mains power supply or 
that the mains power has been 
switched off before replacing 
the interior lighting bulbs.

• The bulbs used in this 

appliance are specific for 
household appliances; do not 
use them for home lighting.

• Installation and servicing should 

be carried out by qualified 
personnel in accordance with 
current standards.

• Do not try to repair the 

appliance yourself or without 
the assistance of a qualified 
technician.

• If the power cable becomes 

damaged, contact technical 
support immediately to arrange 
for it to be replaced in order to 

avoid possible hazards.

• WARNING: A gas cooking 

appliance produces heat, 
humidity and combustion 
products in the room where it is 
installed. Make sure the kitchen 
is well ventilated, especially 
when the appliance is in use: 
keep the natural ventilation 
openings open or install a 
mechanical ventilation device.

• Intensive and prolonged use of 

the appliance may require 
additional ventilation, for 
example opening a window or 
more effective ventilation; for 
example by increasing the 
power of any mechanical 
suction devices.

Risk of damaging the appliance

• Do not use harsh or abrasive 

detergents or sharp metal 
scrapers to clean the glass 
door of the oven since they 
may scratch the surface and 
cause the glass to shatter.

• Use wooden or plastic utensils.
• Do not use steam jets to clean 

the appliance.

• Do not obstruct ventilation 

openings and heat dispersal 
slots.

• Do not sit on the appliance.
• Racks and trays should be 

inserted as far as they will go 
into the side guides. The 
mechanical safety locks that 
prevent them from being 

Содержание Classica Aesthetic SX91GM



























Отзывы: