Smeg Classic CPRU330X, Инструкция по эксплуатации

Страница: 8 / 11

EN
17
5 Installation
5.1 Electrical connection
Power voltage
Danger of electrocution
•
Have the electrical connection
performed by authorised technical
personnel.
•
The appliance must be connected
to ground in compliance with
electrical system safety standards.
•
Disconnect the main power
supply.
General information
Check the grid characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and
brand name is visibly positioned on the
appliance.
Do not remove this plate for any reason.
The appliance works at
115
V~.
Use the power-supply cable provided
with the appliance.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located
near the appliance and in an easily
reachable position.
Connection with plug and socket
Make sure that the plug and socket are
of the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
5.2 Positioning
Heavy appliance
Danger of crushing injuries
•
Position the appliance into the
cabinet cutout with the help of a
second person.
Pressure on the open drawer
Risk of damage to the
appliance
•
Never use the open drawer to
lever the appliance into place
when fitting.
•
Avoid exerting too much pressure
on the drawer when open.
Heat production during
appliance operation
Risk of fire
•
Check that the piece of furniture
material is heat resistant.
•
Check that the piece of furniture
has the required slots.
Installazione
10