Instructions for the User
8
3.
DESCRIPTION OF FRONT PANEL CONTROLS
All the cooker's control and monitoring devices are placed together on the front panel. The table
below provides the key to the symbols used.
FRONT RIGHT-HAND
COOKING ZONE
ELECTRIC OVEN THERMOSTAT
REAR RIGHT-HAND COOKING
ZONE
OVEN
FUNCTIONS
REAR LEFT-HAND COOKING
ZONE
FRONT LEFT-HAND COOKING
ZONE
If the cooker is equipped with an electronic programmer, before using the oven check that the
symbol appears on the display; see point “8.1 Setting the time".
COOKING HOB CONTROL KNOB
Standard heating
The circle next to each knob indicates the hob cooking position that will be
activated. To adjust the heat, press and turn the knob to the desired position.
Adjustment is continuous so that the appliance also operates at any intermediate
value. To turn off, return the knob to 0.
Double heating
The circle next to each knob indicates the cooking zone it controls. To heat the
inner cooking zone, press and turn the knob to the desired position.
To heat both the inner and outer cooking zones, turn the knob to
; and then
release. The knob will thus return to 12. To adjust heating intensity, rotate the
knob anticlockwise to the desired position. To return to heating of the inner
cooking zone only, set the knob back to
and then turn to the desired position.
To switch off, return knob to
.
