Instructions for the user
57
11.5
Removing the door (90 cm model)
To remove the door proceed as follows:
1 Open the door completely and insert two pins into the holes on the hinges indicated in the figure.
2 Grasp the door on both sides with both hands, lift it forming an angle of around 30° and remove it.
3 To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved
sections A are resting completely in the slots. Lower the door and once it is in place remove the pins
from the holes in the hinges.
11.6
Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the
door has been taken off, lift the tabs at the corners as shown in the figure.
Содержание CB51GV1
Страница 28: ......
