User instructions
14
TO CHANGE A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see “
I
NTERRUPTION OF A PROGRAM
”);
•
select the new program;
•
to press again the
START/PAUSE
button
(3)
to make start the new
program.
ANNULLING A PROGRAM
To annul the program in progress, it must first be interrupted (see
“
I
NTERRUPTION OF A PROGRAM
”).
Turn the
PROGRAM SELECTOR (5)
to any point on the "empty" sector
(with no symbols) on the left of the selector and start the dishwasher.
After the water has discharged from the tank, the
ON/OFF
(2)
and
START/PAUSE (4)
lights will both flash.
If the door is opened with the dishwasher in operation, the
appliance switches to "Pause" state, indicated by a series of
beeps and the following configuration of the ON/OFF (2)
and START/PAUSE (4) lights.
Once the door has been closed again, the "S
TART PROGRAM
" procedure
already described must be repeated. The washing cycle will restart from
the point where it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.
Содержание CA129B
Страница 1: ...INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS ...
Страница 2: ......
