Cleaning and maintenance
18
Flame-spreader crowns and burner caps
For easier cleaning, the flame-spreader
crowns and the burner caps can be
removed. Wash them in hot water and non-
abrasive detergent. Carefully remove any
encrustation, then wait until they are
perfectly dry. Refit the flame-spreader
crowns making sure that they are correctly
positioned in their housings with their
respective burner caps.
Igniters and thermocouples
For correct operation the igniters and
thermocouples must always be perfectly
clean. Check them frequently and clean
them with a damp cloth if necessary.
Remove any dry residues with a wooden
toothpick or a needle.
4.3 Removing the door (on some
models only)
For easier cleaning, the door can be
removed and placed on a canvas. To
remove the door proceed as follows:
1. Open the door fully and lift the levers
near the two hinges.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
