24
Instructions for the user
9.4.2 Burner caps and flame-spreader crowns
The burner caps and flame-spreader crowns can be removed for easier
cleaning. Wash them in warm water and a non-abrasive detergent making
sure to remove any encrustation, then wait until they are perfectly dry.
Refit the flame-spreader crowns, making sure that they are correctly in
place with their respective burner caps, and ensuring that the holes
A
in
the flame-spreaders are aligned with the igniters and thermocouples.
Do no wash these parts in a dishwasher.
9.4.3 Igniters and thermocouples
For correct operation, the igniters and thermocouples must always be
perfectly clean. Check them frequently and clean them with a damp cloth if
necessary. Remove any dry residues with a wooden toothpick or a needle.
Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with
metallic finishes on the surface (e.g. anodizing, nickel- or chromium-plating).
9.5
Cleaning the oven
For the best oven upkeep, clean it regularly after having
allowed it to cool.
•
Take out all removable parts.
•
Clean the oven racks with hot water and non-abrasive
detergent. Rinse and dry.
•
For easier cleaning, the door can be removed (see
The oven should be operated at the maximum heat setting for 15/20 minutes after use of specific
products, to burn off the residues left inside the oven.
When the operation is complete, damp parts should be dried thoroughly.
