Instructions for the installer
79
3.4.4 Connection with flexible steel hose (for all types of gas)
This type of connection can be made on both built-in and free-standing
appliances. Only use standards-compliant steel hoses whose length is not
greater than 2 metres. Screw the end of the flexible hose
L
, with the seal
C
positioned between the
B
threaded ½” external gas connector (ISO 228-1).
At the end of the installation, check for any leaks with a soapy solution,
never with a flame.
3.4.5 Connection to the gas cylinder in the internal compartment of the appliance
Open the side compartment and insert a gas cylinder of max 15 kg. Push one
end of the hose onto the hose connector and secure it with one of the two
supplied clamps. Insert the hose into the gas cylinder compartment via the
hole located at the back of the appliance following the diagram shown to the
side. Push the other end onto the pressure regulator of the gas cylinder;
secure it in place using the second supplied clamp.
Check for any leaks
using a soapy solution, never with a flame.
For the connection between the cooker and the gas cylinder use a portion of standards-compliant hose
not less than 1.4 m in length.