Smeg BLV2NE-1, Инструкция по эксплуатации

Страница: 17 / 40

User instructions
15
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.
EXTRA OPTIONS - “Flexi Tabs” BUTTON
Press buttons 6 + 8 ( QUICK TIME PROGRAMS ENERSAVE
option button) simultaneously to activate the "Flexi Tabs" option; the
respective light comes on to confirm the selection. The option is
optimised for use of detergents which are complete with salt and rinse
aid, known on the market as "3 in 1", "triple action", etc. With this option
activated, any salt and rinse aid If you wish to use detergents which
already contain salt and rinse aid already in the dishwasher will not be
used.
N.B.: even with the " Flexi Tabs " option selected, the regenerating
salt/rinse aid lights will still stay on if their containers are empty.
IMPORTANT: the option continues to be active until it is deactivated by
pressing buttons 6 + 8 simultaneously; the light will then go out.
If the water hardness has been set on a value above H3 , and the “Flexi
Tbas ” option is activated, the relative light flashes, warning of a setting
error. Multi-function products are not suitable for use with very "hard"
water; this
does not prevent the use of the option, but the washing
results might not be of the best.
DELAYED START
The start of the washing program can be delayed to program the
dishwasher to operate at the preferred time of day (e.g. overnight). Press
the
PROGRAM DELAY button to activate the option and display a 1 hour
delay. Keep pressing to select the delay required, which may be up to 9,
12 or 24 hours depending on the model.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.