Cleaning and Care
15
ENITEN
4 Cleaning and care
4.1 Instructions
4.2 Cleaning the motor base
To keep the outer surface of the blender
motor base in good condition, it should be
cleaned regularly after use. Let the
appliance cool down first. Use a damp and
soft cloth with mild detergent.
4.3 Cleaning the accessory and
blade assembly
The “Bottle to go” accessory and its
dedicated blade assembly can be washed
by hand using hot water and washing-up
liquid.
The “Bottle to go” accessory can also be
washed in the dishwasher, after removing
the blade assembly.
4.4 Using the Self-clean option
The “Bottle to go” accessory and the blade
assembly can be cleaned using the
automatic cleaning option:
1. Fill the bottle with hot water and washing-
up liquid.
2. Turn the control knob to the setting
1
.
3. Press the
START
button.
4. Press the
PULSE
button for 2 seconds at
a time. Repeat the operation about 10
times.
5. Remove the bottle, drain and rinse.
6. Dry thoroughly.
Improper use
Danger of electrocution
• Unplug the blender before cleaning it.
• Do not immerse the motor base in water
or other liquids.
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance and accessory.
• Do not use cleaning products containing
chlorine, ammonia or bleach on parts
with metallic finishes (e.g. anodized,
nickel- or chrome-plated).
• Do not use abrasive or corrosive
detergents (e.g. powder products, stain
removers and metallic scourers).
• Do not use rough or abrasive materials
or sharp metal scrapers.
Sharp blades
Danger of cuts
• Never touch the blades with your hands.
• Take great care when removing and
handling the blade assembly.
In the event of malfunctions, refer
to the table in section “4.6 What to
do if...” in the
BLF01
blender
manual.