manualshive.com logo in svg

Smeg A1BL-9, Руководство пользователя, Страница: 70 / 96

Поделиться
Скачать
Smeg A1BL-9 Скачать руководство пользователя страница 70

Cleaning and maintenance

168

4.5 Pyrolytic 

(on some models only)

Preliminary operations

Before starting the pyrolytic cycle:
• Clean the internal glass pane following 

the usual cleaning instructions.

• For very stubborn encrustations spray an 

oven cleaning product onto the glass 
(read the warnings on the product); 
leave for 60 minutes, then rinse and dry 
the glass using kitchen roll or a microfibre 
cloth.

• Completely remove all accessories from 

inside the oven.

• Remove the rack/tray support frames.
• Remove the upper guard (when fitted).
• Close  the  door.

Pyrolytic function setting

1. Turn the control knob to the right or left 

to select 

ECO pyrolytic

 or 

pyrolytic

 

from the “special functions” menu. Then 
press it to confirm.

Pyrolytic is an automatic high-
temperature cleaning procedure 
which causes dirt to dissolve. This 
process makes it possible to clean 
the inside of the oven very easily.

Improper use

Risk of damage to surfaces

• Remove any large amounts of food 

residues or spills from previous cooking 
operations from the inside of the oven.

• Switch off the burners or electric hot 

plates of the hob installed above the 
appliance.

Содержание A1BL-9

































































































Отзывы:

Нет отзывов