Smeg 129530, Инструкция по эксплуатации, Страница: 14 / 24

129530
• By the user
Changing the program or the functions
After drying be careful when extracting laundry from
the appliance, as it may be hot!
Prior any changes child lock must be deactivated!
By pressing button D (START/ PAUSE ) the drying program is
paused; display reads PAUSE.
You can now change additional settings or basic programs.
Press MENU to enter any menu and change additional settings
or select another drying program. Con
fi rm by pressing D
( START /PAUSE).
You can switch the appliance off (turn jog A to the position “0”)
and reset all preferred settings.
Door opened
If the door is opened during the drying process this will pause the
operation; the display reads DOOR OPEN.
When the door is closed, the drying process resumes only after
the (D)
START /PAUSE button (D) is pressed. The beep reminds
you that the drying process continues.
If you press the
START /PAUSE button D when the door is open,
the display indicates the CLOSE DOOR warning and sound
signal beeps.
• Power failure
After the power supply has been restored the display
intermittently reads POWER FAILURE. To continue press the
START (D) button and the machine will continue from the point
it had been interrupted, all previous settings remain the same
as before the failure.
If you wish to change settings or originally selected program,
you can do it by simply pressing MENU or turn the selector jog
to the desired program.
Con fi rm the selection by pressing START, and continue as in
normal setting procedure.
In case of power failure child lock is not switched off (if
it was active prior the failure).
• Water container is full
(condenser dryer only)
When the water container is full the drying program is
interrupted. Display reads CONTAINER FULL and a beep is
heard.
After emptying the water from the container, resume drying by
Interruptions Interruptions
14