11
Using as a wireless shutter release
The Mini-Sync can be used as a wireless shutter release.
1. Connect the receiver to the camera using an appropriate
camera release cable.
(Camera release cable list : see page 16-17)
2. Synchronize the channel selection on the transmitter and
receiver.
3. Press the test button on the transmitter halfway to
autofocus and push it strongly to shoot.
Using wireless Bulb mode
Set your camera to Bulb mode. Connect the receiver to your camera using a camera shutter release
cable. Press and hold the test button on the transmitter for 3 seconds to open the camera’s shutter.
The LED light on the transmitter turns off. Now the receiver is in bulb mode.
Release the button when the desired exposure time has elapsed.
Receiver(RX)
Transmitter(TX)
