QuickServer Start-Up Guide
Page 35 of 43
Appendix B.7. Change User Management Settings
•
From the FS-GUI page, click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
NOTE: If the passwords are lost, the unit can be reset to factory settings to reinstate the default
unique password on the label. For ProtoNode, ProtoCessor or ProtoCarrier recovery
instructions, see the
FieldServer Recovery Instructions document
. For ProtoAir recovery
instructions, see the
FieldServer Next Gen Recovery document
. If the default unique
password is lost, then the unit must be mailed back to the factory.
NOTE: Any changes will require a FieldServer reboot to take effect.
Appendix B.7.1. User Management
•
Check that the Users tab is selected.
User Types:
Admin
– Can modify and view any settings on the FieldServer.
Operator
– Can modify and view any data in the FieldServer array(s).
Viewer
– Can only view settings/readings on the FieldServer.
Figure 26: FS-GUI User Management
