9
®
Manifold Specifications
Series SYJ3000
Standard
Location
Direction
P, R port
A, B port
Body ported type
SYJ3 2
Base mounted type
SYJ3 3
Valve
Top
0.9 (0.05)
__
__
Single base type/B mount
Common SUP, Common EXH
2 to 20 stations
P:
¹⁄₈
NPTF
R:M5 0.8
M5 0.8,N3T (ø
⁵⁄₃₂
one touch fitting)
Manifold Specifications
Type
Type 20 Type 31,S31 Type 32,S32 Type 41,S41 Type 46,S46
Manifold type
P(SUP) / R(EXH) type
Valve stations
A, B port specifications
Port size
Effective area
mm
2
(Cv)
Base mounted type
SYJ3 4
M5 0.8
M3 0.5
__
0.9 (0.05)
__
__
1.2(0.067)
__
__
__
1.5(0.08)
__
__
1.0(0.055)
¹⁄₈
NPTF
Base
Side
Common SUP
Individual EXH
Note) Value for a single solenoid 2 position valve mounted on the manifold.
Flat Cable Manifold
Multiple valve wiring is
consolidated through the use
of the flat cable connector.
Simplifies Installation
Clean appearance
With the flat cable manifold, each valve
is wired to the manifold base.
A single MIL specification flat cable
connects the entire manifold to the power
source.
This greatly reduces installation time.
Manifold Specifications
Type
Type 21P Type 32P
Manifold type
P(SUP) / R(EXH) type
Valve stations
Location
Direction
P, R port
A, B port
SYJ3 23
SYJ3 33
A, B port
specifications
Port size
Effective area
Note 1)
mm
2
(Cv)
Rated voltage
Connector
Internal wiring
Note 2)
Applicable solenoid valve
Single base type/B mount
Common SUP / Common EXH
4 to 12 stations
Valve
Top
Base
Side
¹⁄₈
NPTF
M3 0.5
0.9 (0.05)
__
M5 0.8,N3T (ø
⁵⁄₃₂
one touch fitting)
1.2(0.067)
Socket : 26 poles MIL type with strain relief
conforms to MIL-C-83503
Both for +COM and –COM
24VDC,12VDC
SYJ3 23 -
5
6
LOU -M3
SYJ3 33 -
5
6
LOU
Note 1) Value for a single solenoid 2 position valve mounted on manifold base.
Note 2) The manifold can be wired for either positive of negative common because only non-polar valves are used.
The use of valves other than non-polar types is not recommended and may cause damage to the electrical
circuit.
Note)
Type 21P
Type 32P
9
®
