SMC Networks SMCWPCI-N3 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 47

background image

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

•

Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only

Mobile Configurations. The antennas used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be co-located or operating in

«
1
2
3
4
...
»

Содержание SMCWPCI-N3
















































Отзывы:

Нет отзывов

Похожие инструкции для SMCWPCI-N3

Бренд: T-Sinus Страницы: 12

Бренд: National Instruments Страницы: 13

Interflex IF-73

Бренд: Allegion Страницы: 9

Icy Box IB-PCI1901-C32

Бренд: RaidSonic Страницы: 16

Бренд: Elitegroup Computer Systems Страницы: 16

Бренд: Addonics Technologies Страницы: 1

Бренд: Kvaser Страницы: 17

Enhanced Parallel Port Board

Бренд: Lava Страницы: 1

Бренд: Bluebird Страницы: 26

Бренд: PNY Страницы: 2

GV-R585D5-1GD-B

Бренд: Gigabyte Страницы: 32

Бренд: Gigabyte Страницы: 32

Бренд: Gigabyte Страницы: 32

Бренд: Gigabyte Страницы: 36

GV-N98TOC-1GI rev2.0

Бренд: Gigabyte Страницы: 32

Бренд: Gigabyte Страницы: 28

GV-N460OC-1GI Rev2.0

Бренд: Gigabyte Страницы: 36

Бренд: Gigabyte Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды