SMC Networks PF2D5 Series, Руководство по эксплуатации

Страница: 20 / 30

-19-
No.PF
※※
-OMG0006-F
■
Material of parts in contact with fluid and fluids compatibility checklist
Fluid Condition Compatibility
Acetone -
○
Ammonium hydroxide concentration 30% or less
○
Isobutyl alcohol - x
Isopropyl alcohol -
○
Hydrochloric acid concentration 38% or less
○
Ozone - x
Hydrogen peroxide
concentration 50% or less
50
o
C or less
○
Ethyl acetate -
○
Butyl acetate -
○
Nitric acid concentration 10% or less
○
Pure water -
○
Sodium hydroxide - x
Super pure water -
○
Toluene -
○
Hydrofluoric acid concentration 50% or less
○
Sulfuric acid concentration 20% or less
○
Phosphoric acid concentration 30% or less
○
Table symbol
○
: Can be used, Can be used under certain condition x: Cannot be used

1: The material and fluid compatibility check list provides reference value as a guide only.

2: It is possible that some fluids are permeable on the type of fluid, its density and temperature.
Any permeated fluid may affect the products life.
Thus, when using these fluids type verity the fluid in advance by testing it, prior to making a decision to use it.

3: Refer to the T-file (PF
※※
-TDQ0010) too.
●Compatibility is indicated for temperatures at 90
o
C or less.
●The product does not have an explosion proof construction. Be sure to take measures to prevent the area
around the product from becoming filled with an explosive gas, when using an explosive fluid.