- 17 -
4-5. Replacement of Dust Cover
< Removal of Dust Cover >
1. Hold the shaded regions indicated in
the picture ( ) of the cover. Remove
the dust cover from the body groove
carefully.
2. When the bead of the dust cover is
separated from the body groove, pull
the shaded part in direction of the
finger.
3. When all the bead of the dust cover is
out of the body groove, pull the cover in
direction shown by arrow to remove it
from the air gripper.
＜
Mounting of Dust Cover
＞
1. Put the dust cover on the finger.
2. Attach the dust cover to the groove of the finger.
3. Push the bead of the dust cover into the hole in the body groove.
Note: Be careful not to tear the dust cover during mounting or
removal of the dust cover. Also, be careful not to twist
the finger.
Dust cover
Finger
Groove on the body
The bead of the dust cover
Cross section for dust cover
