![background image](http://html1.mh-extra.com/html/smc-networks/kka-series/kka-series_operation-manual_1299202008.webp)
7
Operating environment
!
Warning
(1) Do not use in an environment where corrosive gases, chemicals, sea water, water or steam are
present.
(2) If using in a location directly exposed to sunlight, shade the product from the sunlight.
(3) Do not mount the product in locations where it is exposed to radiant heat.
(4) Do not use the product in a place where static electricity is a problem. It may result in system
failure or malfunction. Consult with SMC if using in such an environment.
(5) Do not use in an environment where the product is directly exposed to cutting oil, lubricant oil or
coolant liquid, etc.
Consult with SMC if the product is to be used in an environment where it is directly exposed to
cutting oil, lubricant oil or coolant liquid, etc.
(6) Do not operate in environments subject to heavy vibration and/or impact. Contact SMC when
using in this kind of location, as leakage and damage to the fitting can result.
(7) Do not use the product in a place where spatter can splash or get inside the product. Spatter
may cause fire. Consult with SMC if using in such an environment.
(8) Do not use in an environment where water splashes onto the product frequently.
Rust may be generated easily.
(9) Do not use the product in a place or environment where foreign matter may get stuck to or get
inside the product.
This can cause air leakage or disconnection of the tubing.
Maintenance
! Caution
(1) Maintenance should be performed according to the procedure indicated in the Operation
Manual. Improper handling can cause damage and malfunction of equipment and machinery.
(2) Maintenance work
If handled improperly, compressed air can be dangerous. Assembly, handling, repair and
element replacement of pneumatic systems should be performed by a knowledgeable and
experienced person.
(3) Draining
Remove drainage moisture from air filters regularly.
(4) Removal of equipment, and supply/exhaust of compressed air
When components are removed, first confirm that measures are in place to prevent workpiece
from dropping and/or equipment running away, etc. Cut the supply pressure and electric power
and exhaust all compressed air from the system. Before restarting the equipment, confirm that
measures are taken to prevent sudden action.
2020-11-16 13:19
DP937237
2020-11-17 09:25
DP937237