SMC Networks JXCD1, Руководство по эксплуатации

Страница: 22 / 89

- 21 -
No.JXC
※
-OMT0007-D
● Input port equivalent signal
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
- - OUT5 OUT4 OUT3 OUT2 OUT1 OUT0
1 ALARM ESTOP WAREA AREA INP SETON SVRE BUSY
Refer to 10. Memory map (P. 32 ) for details of the memory contents.
● Controller information flag
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 － － － －
READY
－ － －
1
－ － － － － － － －
Refer to 10. Memory map (P. 32 ) for details of the memory contents.
● Output port equivalent signal
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
－ －
IN5 IN4 IN3 IN2 IN1 IN0
1
FLGTH JOG(+) JOG(-) SETUP RESET DRIVE SVON HOLD
Refer to 10. Memory map (P. 32 ) for details of the memory contents.
● Numerical data flags
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
Acceleration
Position Speed
Movement
mode
- -
Speed
restriction
-
1
In position AREA 2 AREA 1
Moving
force
Pushing
speed
Trigger
LV
Pushing
force
Deceleration
Set always OFF(0) to “-” memory.
Refer to
10. Memory map (P. 32 ) for details of the memory contents.
● Operation mode/start flag
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
- - - - - - - Start flag
1
- - - - - -
Movement mode
(2 bits)
Set always OFF(0) to “-” memory.
Refer to
10. Memory map (P. 32 ) for details of the memory contents.