HEC-OM-O018-A
Chapter 3 Transporting and Installation
3.2 Installation
3-3
z
Environments with sharp temperature changes.
z
Environments generating strong magnetic noise (having a strong
electric or magnetic field that generates surges).
z
Environments generating electrical static discharge and conditions in
which static electricity is applied to this product.
z
Environments generating strong high frequency radiation (including
radio frequency appliances such as mobile phones and tranceivers).
z
Environments generating strong vibrations and impacts.
z
Environments that may be damaged by lightning.
z
Environments in which forces or gravity may deform the body of the
product.
z
Environments containing harmful gases such as silicone.
z
Locating the cables of the product near the power lines of other
machines.
z
Conditions in which insufficient grounding for the power supply is
provided
z
Conditions that cause dew condensation (this may occur on the surface
of the piping when the Facility Water temperature is low).
z
Places not allowing a space of 50mm or more at the air inlet of the
Surroundings of product and thus causing the sucking of exhausted
heat from the air inlet.
z
Places preventing the horizontal set-up of the product.
3.2.2
Installation in Clean Room
This product uses a fan and generates dust. When it is set up and operated
in a clean room, take appropriate preliminary measures for dust.