SMC Networks IDF190D-3-CW, Руководство по эксплуатации

Страница: 49 / 52

IDX-OM-Y002
Chapter 10 Option R
IDF60/70/80/90 Series 10.1 Safety instructions for use
10-1
Chapter 10 Option R
10.1 Safety instructions for use
Refer to the instructions below when handling the product.
10.2 Specifications
An earth leakage breaker is installed in the product. The customer’s power supply is connected to the
primary side of the earth leakage breaker, and not directly to the terminal block of the standard product.
The earth leakage breaker is located in the front panel.
Product No. Earth leakage breaker specification
IDF190/ 240D-3-RW
Breaker capacity: 50A
、
Sensitivity current 30mA
All electrical work must be carried out in a safe manner by a qualified person in compliance
with applicable national regulations.
-
Be sure to shut off the user’s power supply. Wiring with the product energized is strictly
prohibited.
- Ensure a stable power supply with no surge.
- Use a power supply suitable for the specifications of the product.
- The equipment should be grounded for safety.
Earth leakage breaker does not operate correctly without grounding.
- Do not connect the earth to a water pipe, a gas pipe, or a lightening rod.
- Do not plug too many leads into a single socket. That causes exothermic heat or fire.
- Do not modify the internal electrical wiring of the product.
WARNING