SMC Networks HRS100 Series, Руководство по эксплуатации

Страница: 7 / 84

HRX-OM-S010
Chapter 1 Read before using
HRS100/150 Series 1.1 Communication mode and operation method
1-5
1.1 Communication mode and operation method
LOCAL, DIO and SERIAL are available as the communication modes. Table
1.1-1 explains the communication modes. The default setting is LOCAL.
The operation method depends on the communication mode. Table 1.1-2 shows
how the communication mode and method of operation are related.
The operation of the product functions depends on the communication mode.
Table 1.1-3 shows how the communication mode and functions of this product
are related.
Table 1.1-1 Communication modes
Communication mode Explanation
LOCAL Mode allowing the product to be operated by the operation panel.
DIO
Mode allowing the product to be operated by the contact input/output communication.
When the communication mode is “DIO”, operation mode automatically becomes “DIO
REMOTE”.
"DIO REMOTE” and “DIO LOCAL” can be selected by DIO communication signal.
DIO REMOTE
：
Contact input/output communication takes control of the operation
of the product.
The [REMOTE] lamp on the operation panel turns on.
DIO LOCAL
：
Operation control of the product is the same as that of LOCAL.
The [REMOTE] lamp on the operation panel turns off.
SERIAL
Mode allowing the product to be operated by serial communication. MODBUS/ simple
communication protocol can be selected.
Table 1.1-2 Communication mode and operation
LOCAL
DIO SERIAL
DIO
LOCAL
DIO
REMOTE
MODBUS
Simple
communication
protocol pattern
1 2
Run/Stop control with operation display
panel
○ ○
x x
○
x
Circulating fluid discharge temperature
setting control with operation display panel
○ ○ ○
x x
Except above with operation display panel
○ ○ ○ ○ ○
Condition reading with operation display
panel
○ ○ ○ ○ ○
Run/Stop operation by contact input/output
communication
x x
○
x x
○
Condition reading by contact input/output
communication
○ ○ ○ ○ ○
Reading of the external switch
○ ○
*1
○
*1
○ ○ ○
*1
Run/Stop operation by serial
communication.
x x x
○
x
Circulating fluid discharge temperature
setting control by serial communication.
x x x
○ ○
Condition reading by serial communication.
○ ○ ○ ○ ○

1:
Only one external switch can be installed.
Table 1.1-3 Communication mode and product functions
LOCAL
DIO SERIAL
DIO
LOCAL
DIO
REMOTE
MODBUS
Simple
communication
protocol pattern
1 2
Run timer
○ ○
x x
○
x
Stop timer
○ ○
x x
○
x
Recovery from power cut
○ ○
x x
○
x
Anti-freezing
○ ○ ○ ○ ○ ○
Pump accumulated operating time reset
○ ○
x x
○
x
Warming up function
○ ○ ○ ○ ○ ○
Snow coverage protect function
*2
○ ○ ○ ○ ○ ○

2: This function cannot be set on the products of the cooling method
‘-W’.