SMC Networks HRR010-A-10 Series, Руководство по эксплуатации

Страница: 147 / 166

HRX-OM-X084
Chapter 9 Documents
HRR Series 9.1 Specifications
9-1
Chapter 9 Documents
9.1 Specifications
9.1.1 HRR010-A-10/20-

Table 9-1 Specifications [HRR010-A-10/20-(DMT1)U(YZ)]
Model HRR010-A-10-(DMT1)U(YZ) HRR010-A-20-(DMT1)U(YZ)
Cooling method Air-Cooled refrigerated type
Refrigerant R134a(HFC) R410A(HFC)
Quantity of refrigerant
kg
0.24 0.22
Control method PID control
Ambient temperature andhumidity and altitude

1
Temperature:
5 to 40
℃
,
Humidity
:30 to 70%,
Altitude
: Less than 3000m
Circulating
fluid system
Circulating fluid

2
Tap water, Ethylene glycol aqueous solution 15%
Operating temperature
range

1
℃
15 to 35
Cooling capacity
(50/60Hz)

3
W
770 / 950 950 / 1100
Heating capacity
(50/60Hz)

4
W
340 / 430 250 / 300
Temperature stability

5
℃
±0.1
Pump capacity
(50/60Hz)

6
MPa
0.09(at 5L/min) / 0.11(at 5L/min)
For option
–T1 : 0.35(at 5L/min) / 0.35(at 5L/min)
Rated flow rate
(50/60Hz)

7
L/min
5 / 5
For option
–T1
：
5 / 5
Flowdisplay range

20
L/min
2 to 16
Electric conductivity
display range
µS/cm
0.1 to 48(For option -DM)
Electric conductivity
setting range
µS/cm
0.5 to 45(For option -DM)
Particle filter nominal
filtration rating

19
µm
35
Bypass valve

19
Installed
Tank capacity
L Approx.
3
Fluid outlet,fluid return port port size Rc1/2
Drain port size Rc1/4,With cap
Leakage protection Drain pan (With water leakage detector

19
)
Fluid contact part material
Stainless steel,Copper brazing (Heat exchanger)

12
,
Aluminum oxide ceramic,Carbon,PP,PE,PPE,POM,PET,PA,FKM,EPDM,NBR,
PVC,PPS,fluoropolymer

13
,Ion exchange resin

13
Electrical
system
Power supply
1-phase AC100V (50/60Hz)
1-phase AC115V (60Hz)
Allowable voltage fluctuation±10%

15
1-phase AC200 to 230V (50/60Hz)
Allowable voltage fluctuation±10%

15
Circuit protector
A
15 10
Applicable earth leakage breaker

8
Rated current
：
15A
Sensitivity current
：
30mA
Rated current
：
10A
Sensitivity current
：
30mA
Cable Qty x size(Inculding ground)

16
3 cores ×14AWG(3 cores×2.0m
㎡
)
Rated operating current
(50/60Hz)

17
A
6.2 / 7.7 2.5 / 3.0
For option
–T1
For option
–T1
9.5 / 10.7 4.3 / 4.7
Rated
power consumption
(50/60Hz)

17
kW
(kVA)
0.50 / 0.67
(0.56 / 0.70)
0.48 / 0.60
(0.51 / 0.61)
For option
–T1
For option
–T1
0.72 / 0.84
(0.86 / 0.96)
0.73 / 0.80
(0.85 / 0.94)
Communication function Contact input / output, Serial RS-485 / RS-232C
Noise level (50/60Hz)

9
dB(A)
60 / 60 59 / 59
Dimensions

10
mm
W483xD550xH221
Accessory

18
Power supply connector, Operation manual, Particle filter element

19
Weight

11
kg
32 29

1: Use the product in conditions where freezing will not occur. Consult with SMC if using in a season or region where
the ambient temperature will fall below zero.

2: If tap water is used, use water which satisfies the standard of The Japan Refrigeration And Air Conditioning
Industry Association (JRA GL-02-1994/Cooling water system
–circulation type - make-up water).

3: (1)Ambient temp: 25
℃
, (2)Circulating fluid temp.: 20
℃
, (3)Circulating fluid rated flow, (4)Criculating
fluid : Tap water,(5) Power supply :100V type:AC100V, 200V type :AC200V, (6)Piping length : Shortest
The cooling capacity will be reduced by 300W when option T1 [Inverter pump] is selected.

4: (1)Ambient temp: 25
℃
, (2)Circulating fluid temp:20
℃
,(3) Circulating fluid rated flow, (4)Criculating fluid : Tap water,
(5) Power supply :100V type:AC100V, 200V type: AC200V, (6)Piping length : Shortest