QuickServer Start-Up Guide
Page 23 of 46
6.4.2 Using the W eb GUI to set the IP Address
From the GUI main home page, click on setup and then Network Settings
to enter the Edit IP
Address Settings menu.
Modify the IP Address (N1 IP Address field) of the QuickServer Ethernet port.
If necessary, change the Netmask (N1 Netmask field).
Type in a new Subnet Mask.
If necessary, change the IP Gateway (Default Gateway field).
Type in a new IP Gateway.
NOTE:
If the FieldServer is connected to a router, the IP Gateway of the FieldServer should be set to the
same IP Address of the router.
Click Update IP Settings, then click on the System Restart to restart the Gateway and activate the
new IP Address. Note that if the GUI was open in a browser, the browser will need to be pointed
to the new IP Address of the QuickServer before the GUI will be accessible again.
Figure 17: Web GUI Network Settings
