C
HAPTER
3
| Installing the Switch
Installation
– 23 –
To connect the switch to a power source:
1.
Plug the power cord into a grounded, 3-pin, AC power source.
Figure 9: AC Power Cord and Power Socket
2.
Insert the plug on the other end of the power cord directly into the AC input
socket on the back of the switch.
3.
Check the LED indicators on the switch front panel as the unit is powered on
to verify that power is being received. If not, recheck the power cord
connections at the AC supply source and back panel power input connector.
P
OWERING
O
N
The SMCGS1610 and SMCGS2410 switches are powered by connecting to an AC
power supply using a power cord. When powering on the switch, it automatically
initializes and the LED indicators respond as follows:
N
OTE
:
Your country’s AC power outlet standards may not match the
power plug of the included AC power cord, you may need to change the
AC power cord. You must use a cord set that has been approved for the
socket type in your country.
