Wireless Card Manager
23
Or
1.
Select 128-bit or 64-bit in the Encryption field.
2.
In the Key type field, select ASCII or Hex.
3.
In the Default Key field, select one key as the default key that
you want to use for encryption.
4.
Manually type in a string of characters in the corresponding
Key number field that you selected in step 3.
5.
Click Apply changes to allow the settings to take effect.
Note:
When setting up WEP without using the Passphrase
function, if the Key Type is set to Hex, only Hexadecimal
characters (range: 0~9 and A~F) can be used. When
encryption is set to 64-bit, a maximum of 10 Hex
characters can be entered in the Key field. When
encryption is set to 128-bit, a maximum of 26 Hex
characters can be used. If the Key Type is set to ASCII,
and encryption is set to 64-bit, then 5 ASCII characters
can be used in the Key field. For 128-bit encryption, 13
ASCII characters can be used.
•
152-bit WEP
If the 152 bit WEP is used, select the ASCII key type and choose
the Default Key number. Then enter the key characters. 16 ASCII
characters can be used.
