5.6.7
Display RF IP (Cable) and CPE / Remote Management IP (RIP SRC)
•
Display RF IP (Cable) and CPE / Remote Management IP (RIP SRC). From the MAIN> prompt
enter:
ipcable
MAIN> ipcable
Cable new IP address: 10.0.0.35
RIP SRC IP address: 8.9.3.2
5.6.8
Display RIP Information
•
Display RIP information. From the MAIN> prompt enter:
RipShow
MAIN> ripshow
rip debug level 0
rip report interval 30 seconds
ether interface (brgEnd32)
no rip send
no rip receive
no rip authentication
cable interface (emta0)
5.6.9
Display Route Table
•
Display Route Table. From the MAIN> prompt enter:
RouteShow
MAIN> routeshow
- 18 -
