manualshive.com logo in svg

SMC Networks EZ Connect SMC8014W-G, Инструкция по установке, Страница: 57 / 60

Поделиться
Скачать
SMC Networks EZ Connect SMC8014W-G Скачать руководство пользователя страница 57

APPENDIX D | Compliances

 

 
FCC Interference Statement 
This equipment has been tested and found to comply with the limits for a Class B digital device 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against radio interference in a commercial environment. This equipment can 
generate, use and radiate radio frequency energy and, if not installed and used in accordance 

with the instructions in this manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause interference, in which case 

the user, at his own expense, will be required to take whatever measures are necessary to 
correct the interference. 

 
CE Declaration of Conformity 
This equipment complies with the requirements relating to electromagnetic compatibility, EN 
55022/A1 Class B, and EN 50082-1. This meets the essential protection requirements of the 

European Council Directive 89/336/EEC on the approximation of the laws of the member states 
relation to electromagnetic compatibility.  

Compliances 
 

 

Содержание EZ Connect SMC8014W-G





























































Отзывы:

Нет отзывов