16
8.
Turn off your computer.
9.
Insert the EZ Connect™ N Wireless PCI Adapter in to an available PCI slot.
IMPORTANT:
For
correct installation of new hardware please refer to your Computer user manual.
NOTE:
To install
the card you may be required to remove the attached antennas. This is done by pulling the
antennas from the base.
10.
Once the EZ Connect™ N Wireless PCI Adapter is inserted screw on the larger 5dBi antenna to the
connector marked with a green sticker. If you had to remove the antennas in step 9 reconnect them
now. The antennas push on (not screw on) to the remaining connectors.
11.
Turn On your computer.
12.
The “Found New Hardware Wizard” will appear. Click [No, not this time], then Next].
13.
Click [Install the software automatically (Recommended)], then click [Next].
