SMC Networks E21011, Руководство пользователя, Страница: 115 / 264

C
HAPTER
11
| Using the Command Line Interface
Entering Commands
– 115 –
filters Show filters.
interface Show interface information.
line TTY line information.
lldp Show lldp parameters.
logging Show the logging buffers.
radius Show radius server.
snmp Show snmp configuration.
sntp Show sntp configuration.
station Show 802.11 station table.
svp Show SVP.
system Show system information.
version Show system version.
wds Show WDS service.
AP: show
The command “ show interface ? ” will display the following information:
AP# show interface ?
ethernet Show Ethernet interface
wireless Show Wireless interface
AP# show interface
N
OTE
:
Partial keyword lookup does not work with the show command.
N
EGATING THE
E
FFECT
OF
C
OMMANDS
For many configuration commands you can enter the prefix keyword “no”
to cancel the effect of a command or reset the configuration to the default
value. For example, the logging command will log system messages to a
host server. To disable logging, specify the no logging command. This
guide describes the negation effect for all applicable commands.
U
SING
C
OMMAND
H
ISTORY
The CLI maintains a history of commands that have been entered. You can
scroll back through the history of commands by pressing the up arrow key.
Any command displayed in the history list can be executed again, or first
modified and then executed.
Using the show history command displays a longer list of recently
executed commands.
U
NDERSTANDING
C
OMMAND
M
ODES
The command set is divided into Exec and Configuration classes. Exec
commands generally display information on system status or clear
statistical counters. Configuration commands, on the other hand, modify
interface parameters or enable certain functions. These classes are further
divided into different modes. Available commands depend on the selected
mode. You can always enter a question mark “ ? ” at the prompt to display a