9
Gener
al
3 positions
5 positions
Gener
al
8
Gener
al
3 positions
5 positions
Gener
al
Installation (continue)
Mounting controller (When controller separated type is used)
Mounting screw (M5)
Tightening torgue 1.3 to 1.4N
･
m
L type bracket
Controller
Motor
Mounting screw
(M4)
Mounting by L type bracket
Mount the optional L type bracket on the main
unit using the two mounting screws M5X8L and
install on the facility using hexagon socket head
cap screws as shown in fig. 2.
Clamp bracket
DIN rail
mount bracket
Mounting screw(M3)
Tightening torgue
0.5 to 0.7N
•
m
A
Mounting by DIN rail bracket
Use set screw to mount optional DIN rail mount
bracket to the body.
When mounting, lower the clamp bracket as in
fig. 3.
Please be noted that some tools may interfere
with clamp bracket.
DIN rail
Tightening torgue
0.4 to 0.6N
•
m
Clamp screw(M4)
When setting to DIN rail, place A of fig. 3 into
DIN rail.
While pushing it, fix it by the clamp of screw in fig.
4.
Inadequate pushing may cause falling of parts.
Direct mounting
Use M4 mounting screw shown in fig. 1 or M5
tap hole to mount the controller.
How to remove controller
Loosen M4 mounting screw shown in fig. 1 and
remove the controller.
fig. 1
fig. 2
fig. 3
fig. 4
When the floating bracket is used
Installation of a holding bolt.
Install the pin and the conical spring washer in the slider with a holding bolt.
Connection with external guide
Connect an external guide by using the floating
structure.
Keep the resistance of the external guide not
more than the allowable resistance.
Nominal size
16
Allowable external resistance
10N
25
20N
Allowable external resistance
Slider
Pin
Conical spring washer
Holding bolt
Tightening torque 3 to 3.2N•m
Floating Bracket
(MYAJ25)
Application
Mounting direction 2
(to minimize the installation hight)
Mounting direction 1
(to minimize the installation width)
Note) Refer to tha catalog for adjustable range.
Work
Floating bracket
Guide
E-MY2B Series
Work
Floating bracket
Guide
E-MY2B Series
