SMC Networks D-S7 Series, Руководство по эксплуатации

Страница: 14 / 26

-13-
No.D-
※
S-OMB0023-B
< D-S99(V), D-S9P, D-T99 >
1. Switch block detaching
Remove the cross recessed round head screw (1) to detach the switch block.
2. Auto switch mounting
Secure the auto switch with the cross recessed round head screw (1) and holding block (A).
Proper tightening torque: 0.4 to 0.6 Nm

: Since the holding block (A) moves inside the groove, move it to the mounting position beforehand.
•
After the actuated position has been adjusted with the cross recessed round head screw (1), use the auto switch.
•Setting the detecting position
Set the actuator at the stroke end. Set the switch in the area to where the auto switch lamp light.
For actual installation works, perform adjustment with checking the operating conditions of the Auto switch.
The rotary actuators have their own setting methods. Follow their instructions.