![SMC Networks CDUJB10-20D Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/smc-networks/cdujb10-20d/cdujb10-20d_manual_1299852026.webp)
Series
CUJ
Specific Product Precautions 2
Be sure to read before handling.
Refer to pages 15 through 21 for safety instructions, actuator precautions and auto switch precautions.
23
Mounting of Speed Controllers and Fittings
<Speed controllers>
With auto switch
<One-touch fittings and hose nipples>
Without auto switch
With auto switch
Caution
a) Side mount
b) Front mount
Bore size (mm)
Port size
Stroke (mm)
AS12
1F-M3-23
AS12
1F-M3-04
AS13
1F-M3-23
AS13
1F-M3-04
6, 8, 10
M3 x 0.5
4 or more
Bore size (mm)
Port size
Stroke (mm)
AS12
1F-M3-23
AS12
1F-M3-04
AS13
1F-M3-23
AS13
1F-M3-04
4, 6, 8, 10
M3 x 0.5
6
––
––
8 or more
Bore size (mm)
Port size
Stroke (mm)
KJS23-M3
M-3AU
M-3ALU
One-touch fitting
Hose nipple
6, 8, 10
M3 x 0.5
4
6 or more
Bore size (mm)
Port size
Stroke (mm)
KJS23-M3
KJS04-M3
KJH23-M3
KJH04-M3
KJL23-M3
KJL04-M3
KJW23-M3
KJW04-M3
M-3AU
M-3ALU
One-touch
fitting
Hose nipple
4
6, 8, 10
M3 x 0.5
4
––
––
––
––
––
––
––
6 or more
4
––
––
––
––
––
––
––
6 or more
Figure 1
Note) Only applicable to the mounting position shown in Figure 1 below.
Note) Only applicable to the mounting position shown in Figure 1 below.
: Applicable to mounting positions 1, 2, 3 and 4.
: Applicable to mounting positions 1, 2 and 3.
: Applicable to mounting positions 1 and 3.
Mounting position 1
Mounting position 2
Mounting position 3
Mounting position 4
Since the cylinder port size of M3 x 0.5 is used, use the
cylinder series models listed below when connecting speed
controllers and fittings directly to cylinders.
1. After manually tightening
speed controllers and fittings
, tighten
approximately a quarter turn more using a tightening tool. In
cases where there are gaskets in two places such as
universal elbows, universal tees, etc., double the additional
tightening to a half turn. If screws are tightened excessively,
air leakage may result due to broken threads or a deformed
gasket. If screws are tightened insufficiently, looseness and
accompanying air leakage are likely to occur.
Without auto switch
Notes) 1. The above figures show the mounting positions with series KJS
One-touch fittings installed.
2. Refer to sections starting on pages 2-1-1 and 2-1-47 of "Best
Pneumatics No. 4" for the details of One-touch fittings and hose
nipples.
Содержание CDUJB10-20D
Страница 1: ...Mini Free mount Cylinder Series CUJ 4 6 8 10 CAT ES20 157 A...
Страница 27: ......