SMC Networks Barricade SMCBR 18VPN, Руководство пользователя

Страница: 60 / 73

8.3 | PPTP/ L2TP configuration example
Pease note that the virtual address of the L2TP and PPTP server have to be
different.
PPTP
• Step 1: Go to the PPTP Server section and select the Enable radio button
• Step 2: Change the virtual IP value if necessary (this is the IP network that your
PPTP clients will automatically be connected to)
• Step 3: Set the authentication protocol
• Step 4: Enter a tunnel name and set the username and password
• Step 5: Configure your remote VPN client to connect to the WAN IP of the router
L2TP
Microsoft uses an embedded L2TP/IPSEC VPN implementation. In order to use the Microsoft
standard VPN client, one has to disable the IPSEC on the PC. Please refer to Microsoft help
to perform this operation.
• Step 1: Go to the L2TP Server section and select the Enable radio button
• Step 2: Change the virtual IP value if necessary (this is the IP network that your
L2TP clients will automatically be connected to)
• Step 3: Set the authentication protocol
• Step 4: Enter a tunnel name and set the username and password
• Step 5: Configure your remote VPN client to connect to the WAN IP of the router
54