SMC Networks 8126PL2-F, Руководство по управлению

Страница: 368 / 614

Command Line Interface
4-80
4
Command Usage
Due to system limitations in the current software, privilege commands
(page 4-79) entered during the current switch session will not be stored
properly in the running-config file (see
show running-config on page 4-18).
The privilege rerun command must therefore be used to correctly update
these commands to the running-config file.
Example
show privilege
This command shows the privilege level for the current user, or the privilege level for
commands modified by the
privilege command (see page 4-79).
Syntax
show privilege [ command ]
command - Displays the privilege level for all commands modified by the
privilege command.
Command Mode
Privileged Exec
Example
This example shows the privilege level for any command modified by the privilege
command.
Authentication Sequence
Three authentication methods can be specified to authenticate users logging into the
system for management access. The commands in this section can be used to
define the authentication method and sequence.
Console#privilege rerun
Console#
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#
Table 4-28 Authentication Sequence
Command Function Mode Page
authentication login Defines logon authentication method and precedence GC 4-81
authentication enable Defines the authentication method and precedence for
command mode change
GC 4-82