SMC Networks 7901WBRA2 FICHE, Руководство пользователя

Страница: 52 / 89

Field Description
Status The status of the PVC you are configuring.
Login Name The login name provided by your ISP.
Password The password provided by your ISP.
Authentication Method You can choose
Auto
,
CHAP
, or
PAP
.
Connection Type You can choose
Continuous
,
Connect on Demand
, or
Manual
.
Idle Time (min) If select
Connect on Demand
, you need to enter the idle timeout time. Within the
preset minutes, if the router does not detect the flow of the user continuously, the
router automatically disconnects the PPPoE connection.
Auto Disconnect Time Set the auto disconnect time, the router disconnects automatically, even if the data
is being transmitted.
Warn Disconnect Delay If set auto disconnect time, you can configure a warning period that will follow the
disconnect time, after which the router disconnects.
Default Route Select
Enbale
, when you are configuring PPPoA, PPPoE, 1483 Routed and 1483
MER connections.
MTU The size of the largest packet or frame that can be transmitted.
IP Address Choose a dynamic or static IP address for the WAN interface.
Bridge You can choose
Bridged Ethernet
,
Bridged PPPoE
, or
Disable Bridge
.
AC-Name The accessed equipment type.
Service-Name The service name.
802.1q Specifies whether VLAN tagging should be used.
VLAN ID (0-4095) The unique number assigned to this virtual LAN.
Apply Changes Save the settings of this page.
Return Return to the
WAN Interface
page.
Undo Refresh this page.
Click
ATM Setting
in the
WAN Interface
page. The page shown in the following figure appears. In this page, you
can configure the parameters of the ATM for your ADSL router, including QoS type, PCR, CDVT, SCR and MBS.
The following table describes the parameters and buttons of this page.
34