manualshive.com logo in svg

SMC Networks 7824M/VSW, Руководство по установке

Поделиться
Скачать
SMC Networks 7824M/VSW Скачать руководство пользователя страница 12

Installation Manual 

IMN 

TigerAccess™ EE 

SMC7824M/VSW

 

11 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15/68 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures: 

 

−

 Reorient or relocate the receiving antenna 

 

−

 Increase the separation between the equipment and receiver 

 

−

 Connect the equipment into an outlet on a circuit different from that to which   

 

  the receiver in connected. 

 

−

 Consult the dealer or an experienced radio/TV technician for help. 

 

1.10 UL 

Safety 

Compliance 

This switch has been tested and found to comply with the requirements of UL. This 
equipment is intended to be powered from a limited power source output of a previously 
certified power supply.   

 

1.11 

Declaration of RoHS Conformity 

SMC Networks considers the protection of the environment and the preservation of natu-
ral resources as a major duty and thus undertakes great efforts to design its products to 
be environmental friendly. 

Therefore, as of July 1st, 2006, all contract products of SMC Networks   

•

  to which the RoHS (the Restriction on the use of certain Hazardous Substances in 

 

electrical and electronic equipment) directive applies to 

•

 

and which are put on the market within the countries where the RoHS requirements 

 

are transposed into national law 

are in compliance with the requirements of the RoHS. 

SMC Networks reserves the right to apply the exemptions to the RoHS requirements as 
set out in the Annex to the RoHS directive, in particular lead in solders for network infra-
structure equipment for switching, signaling, transmission as well as network manage-
ment for telecommunication. 

Содержание 7824M/VSW









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды