SMC Networks 6752AL2 - annexe 1, Руководство по установке

Страница: 22 / 80

A
BOUT THE
T
IGER
S
WITCH
10/100
1-2
Figure 1-1 Front and Rear Panels
Switch Architecture
The SMC6752AL2 switch employs a wire-speed, non-blocking switching
fabric. This permits simultaneous wire-speed transport of multiple packets
at low latency on all ports. The switch also features full-duplex capability
on all ports, which effectively doubles the bandwidth of each connection.
This switch uses store-and-forward switching to ensure maximum data
integrity. With store-and-forward switching, the entire packet must be
received into a buffer and checked for validity before being forwarded.
This prevents errors from being propagated throughout the network.
Network Management Options
This SMC6752AL2 switch contains a comprehensive array of LEDs for
“at-a-glance” monitoring of network and port status. It also includes a
management agent that allows you to configure or monitor the switch
using its embedded management software, or via SNMP applications. To
manage the switch, you can make a direct connection to the RS-232
console port (out-of-band), or you can manage the switch through a
network connection (in-band) using Telnet, the on-board Web agent, or
SNMP-based network management software.
PWR
Diag
RPU
25 26 27 28 29 30 31 32 33 34 35 36
51/Down 52/Up
49 50
1 2 3 4 5 6 7 8 9 10 11 12 37 38 39 40 41 42 43 44 45 46 47 48 13 14 15 16 17 18 19 20 21 22 23 24 13 14 15 16 17 18 19 20 21 22 23 24
49
50
51
52
6 7 1 6 A L 2 6 7 1 6 A L 2
T i g e r S w i t c h 1 0 / 1 0 0 T i g e r S w i t c h 1 0 / 1 0 0
N e t w o r k s
100-240V~ 50-60Hz 1.5A
RPU
DC
12V 4.5A
Console
10/100 Mbps RJ-45 Ports
Port Status Indicators
1000BASE-T Ports
1000BASE-T/SFP Ports
System Indicators
Power Socket
Redundant Power Socket
Console Port