manualshive.com logo in svg

SMC Networks 6709FL2 INT - FICHE TECHNIQUE, Руководство по управлению

Поделиться
Скачать
SMC Networks 6709FL2 INT - FICHE TECHNIQUE Скачать руководство пользователя страница 61

P

ORT

 M

IRRORING

3-39

Port Mirroring

You can mirror traffic from any source port to a target port for real-time 
analysis. You can then attach a logic analyzer or RMON probe to the target 
port and study the traffic crossing the source port in a completely 
unobtrusive manner. 

Command Usage

• Monitor port speed should match or exceed source port speed, 

otherwise traffic may be dropped from the monitor port.

• All mirror sessions must share the same destination port.
• When mirroring port traffic, the target port must be included in the same 

VLAN as the source port.

Field Attributes

• Roving Analysis State 

– Enables / disables port mirroring.

•

Analysis Port 

– The port that mirrors traffic from the source port.

•

Monitor Ports 

– The ports whose traffic will be monitored.

•

Monitor Rx 

– Mirrors receive traffic.

•

Monitor Tx 

– Mirrors transmit traffic.

Web 

– Click Administrator=>Port Sniffer. Specify the analysis port, the 

monitor ports and traffic types to mirror, enable the Roving Analysis State, 
and then click Apply.

Содержание 6709FL2 INT - FICHE TECHNIQUE















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды