In the Bridge Control MIB page, set the
parameters and then click on Apply Changes
to implement the settings.
Network Type -
Set the operating mode of the
Bridge. This field can be set to Access Point,
Bridge Master or Bridge Slave. (Default:
Bridge Master)
DS Channel -
Set the channel number as the
operating radio channel.
Note:
The availiable channel settings are
displayed to the right of the
DS Channel field. Local regulations
determine which channels are available.
FCC/IC: 1-11, ETSI: 1-13, France: 10-13,
Spain: 10-11, MKK: 1-14.
SSID -
This should be set to the same value as
other wireless devices in your network. (Default:
BRIDGE)
Note:
The SSID is upper/lower case sensitive and
can consist of up to 32 alphanumeric
characters.
RTS Threshold
- Set the RTS Threshold to the
same as that used by other devices in your
network. (Default: 2,305, which means Disabled)