SMC Networks 2552W-G2, Руководство пользователя

Страница: 242 / 294

Command Line Interface
6-104
6
Example
ssid
This command configures the service set identifier (SSID).
Syntax
ssid < string >
string - The name of a basic service set supported by the access point.
(Range: 1 - 32 characters)
Default Setting
802.11g Radio: SMC_VAP_11G0 (0 to 7)
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
Clients that want to connect to the wireless network via an access point must
set their SSIDs to the same as that of the access point.
Example
closed-system
This command prohibits access to clients without a pre-configured SSID. Use the no
form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
When closed system is enabled, the access point will not include its SSID in
beacon messages. Nor will it respond to probe requests from clients that do
not include a fixed SSID.
Enterprise AP(if-wireless g: VAP[0])#description RD-AP#3
Enterprise AP(if-wireless g: VAP[0])#
Enterprise AP(if-wireless g: VAP[0])#ssid RD-AP#3
Enterprise AP(if-wireless g)#