- 22 -
e) Click the "Written data"list button and select the data to be written to the controller.
f) Click the Writing preparation completion “NEXT” button.
Note) Be sure to backup any previously programmed controller data before writing the data to
the controller. Refer to 4.4.3 Backup for how to backup the data.
g) When the check window is dispalayed as shown below, verify that the displayed information is
correct. If the information is correct, click the "Write" button.
If the SV No. of the blank controller is not identical to the SV No. (SV No. of model data)
displayed in the Check window, a WARNING is displayed as shown below. To cancel the
writng of data, click "Cancel" button and return to the Selecting ACT window, and set the SV
No. of the controller condition.
