SMB XDI 8 D, Инструкция пользователя

Страница: 7 / 7

Manufacturer :
SBM
3 cottages de la Norge 21490 CLENAY - FRANCE
1312
Agent :
Installer's stamp :
GAS INFRARED HEATERS
XDI
–
XDI D HEATERS
USER GUIDE
Nr 05000371/7
( TO BE DISPLAYED NEXT TO THE CONTROL SWITCHES )
START-UP :

Open the main gas valve.
 Switch the power on.
 Start the heater ignition cycle by positionning the speed switch on "MAXI"
and the ignition switch on "I / ON".
 If the flame is not lit after 30 seconds, the heater goes to safety state.

The sequence of ignition can begin again only after switching the power off.
After 5 seconds, switch the power on.
 The heater is on as long as : power supply is on and the valves are opened.
 If the flame is still not lit or goes out, close the main gas valve, switch
the power off and call your SBM installer.
 After 5 minutes heating on the maxi speed, it is possible to put the speed
switch on "MINI".
Always light the heaters on the "MAXI" speed. Do not put the speed
"MINI" before 5 minutes heating on the "MAXI" speed.
SHUT OFF :
 Put the ignition switch on "O / OFF".

Close the main gas valve.
MAINTENANCE :
 To be performed once a year by your SBM installer, according to the
SBM INSTALLER INSTRUCTIONS Nr. 05000372.
