
TECHNICAL INFORMATION
TRAMPOLINE „S“
We will be pleased to help you with further questions:
smb Seilspielgeräte GmbH Berlin in Hoppegarten
Fon.
+49 (0) 3342 50837-20
Technikerstraße 6/8
Fax. +49 (0) 3342 50837-80
www.smb.berlin
DE-15366 Hoppegarten
05.06.2018
Page 4 of 4
Jumping Mat Orientation
The jumping mat flanks which are equipped with chain links (see Fig. 2) have to face the frame’s sides which
feature boreholes (see Fig. 2).
Brief Instruction: Jumping Mat Installation
• Tighten the spring (using the provided tool)
• Clip the spring into the corresponding link
• Release the spring
6
Maintenance Instructions EN 1176-1
Routine Visual Inspection
The frequency of this inspection depends on local conditions (high/low usage, vandalism, weather influence).
Operational Inspection (Every 6 Months)
• Check unit for general damage or wear and tear.
• Check condition of the jumping mat, spring suspensions and protective panels.
Main Inspection
The trampoline framework consists of galvanised sheets, 3 mm thick. Due to this fact, a main inspection,
which then includes checking the framework for corrosion, only needs to be carried out every two years.
Type Plate Location
The type plate is located in one of the rubber tiles, which are glued on the trampoline steel frame. On the type
plate you will find details to the manufacturer, the DIN-Norm, a serial number and also a QR-Code for
furthermore information.
Tighten the spring
(using the provided tool)
Clip the spring into the
corresponding link
Release the spring