English - 21/68
20/68 - English
SMASH TWIG
SMASH TWIG
Do not attempt to tamper with or open the battery and
/ or charger.
Do not short-circuit the battery and be careful when
handling it so as not to accidentally short-circuit it with
conductive elements such as rings, bracelets, keys,
etc. When the battery is short-circuited it increases in
temperature and may explode or burn.
Do not attempt to burn the battery or incinerate it
even if it is damaged or completely discharged. Do not
leave the battery near a heat source. The battery can
explode with heat or fire, causing serious personal and
material damage.
This battery is sealed and should never leave liquid
inside. If the seal breaks down and the liquid touches
your skin quickly wash with plenty of soap and water,
neutralize the liquid with a weak acid such as lemon
or vinegar and go to your medical center urgently. If
battery fluid touches your eyes, rinse thoroughly with
water for 10 minutes and seek immediate medical
attention. If the seal is damaged, do not inhale the
vapors produced by the battery, as they may irritate
you. In case of accidental inhalation, breathe fresh air
and seek urgent medical attention.
Always disconnect the battery from the machine
before doing any work. Only handle this machine
when it is disconnected.
2.5. USE AND CARE OF THIS MACHINE
Cut only wood. Do not use this machine for other
purposes not provided. For example: do not use
scissors to cut plastic materials, bricks, metals. The
use of scissors for operations other than those planned
may cause dangerous situations.
Use this machine, accessories, tools, etc. in
accordance with these instructions and in the
planned manner taking into account the working
conditions and the work to be carried out. The use
of this machine for applications other than those
intended may cause a dangerous situation.
The manufacturer will not be liable in any case for
damages caused by improper or incorrect use of this
machine.
Do not force this machine. Use this machine for the
correct application. Using the correct machine for
the type of work to be done will allow you to work
better and safer.
Do not use this machine if the switch does not
switch between “closed” and “open”. Any electrical
machine that cannot be controlled with the switch
is dangerous and must be repaired.
Keep this machine. Check that the moving parts
are not misaligned or locked, that there are no
broken parts or other conditions that may affect the
operation of this machine. Whenever this machine
is damaged, repair it before use.
Many accidents are caused by poorly maintained
machines.
Keep cutting instruments sharp and clean. Properly
maintained cutting instruments with sharp cutting
edges are less likely to lock and easier to control.
Keep the handles of this machine dry and clean.
The greasy or oiled handles are sliding and cause
loss of control over the machine.
Disconnect the battery from the machine before
making any adjustments, cleaning or storing this
machine. Such preventive safety measures reduce the
risk of accidentally starting this machine.
Содержание TWIG 130 W
